Follow these easy steps to get your AEG LAVATHERM T30 Dryer up and running in no time.
Check the AEG LAVATHERM T30 Dryer for any transport damages. Do not connect a damaged appliance. Contact your supplier if you notice any damages.
Do not install the dryer in rooms at risk of freezing. Ensure the dryer is installed level, and if positioned next to a heater, insert a heat insulating, non-flammable board with dimensions 85x57.5 cm.
Make sure the plug is freely accessible after installation. If a permanent connection to the power supply is required, it must be done by an authorised electrician.
Wipe the drum of the dryer with a moist cloth before the first use to ensure it is clean.
To conduct exhaust fumes, use a flexible spiral conduit with a diameter of 105 mm. This can be obtained through AEG Service Force Centre or electrical shops and attached using the provided adapter.
Familiarize yourself with the program selector positions: 150MIN - 30MIN for setting drying time, COOL AIR for smoothing creased garments, and OFF to switch off the dryer.
Keep the area around the dryer clean and free of flammable items. Do not lean on the opened door, and avoid using a water jet on the appliance to prevent electric shock.